Product demo · 90 seconds

Five precision assistants for rotating equipment.

Turbomachinery.ai is a suite of AI-assisted calculators and reference tools built for commissioning engineers, millwrights, and field service teams — usable on a laptop or a tablet in the field. Subscribe to run your own numbers.

Start subscription Start the tour
Five assistants · one subscription · one workflow each
turbomachinery.ai
Turbomachinery.ai home page — 'AI-Powered Turbomachinery Tools' hero on an engineering-drawing grid background.
What it is

Field-ready calculators, backed by AI.

Everything a rotating-equipment professional reaches for on a job site — alignment math, flange checks, unit conversions, preservation planning — reworked as focused assistants that answer the question, show the working, and get out of your way.

Aligned with API practice

Alignment tolerances, flange parallelism, thermal growth — prepared in line with applicable API standard requirements such as API RP 686. Independent of API; not endorsed by API.

Works how field teams work

Imperial and metric side-by-side. Inputs match what you actually read on the indicators. Outputs are the numbers you can hand a millwright — shims, moves, PASS/FAIL calls.

One subscription, whole suite

One subscription unlocks all five assistants — alignment, flange, unit conversions, preservation, and LO flushing. Watch the tour below to see what each tool does, then pick a plan when you're ready to run your own numbers.

The tour

Five assistants, one workflow each.

Each assistant is scoped to a single field task. Open it, answer a few inputs the way you'd read them off the dial or the drawing, and get an actionable result — every one is a live link below.

Alignment Assistant — 'Machinery Alignment Tools' page listing Unit Conversions, Sag Indicator, Thermal Growth, Shim Calculator, Alignment Moves, Alignment Check, 3D Alignment Plot, API RP 686 Tolerances.
Assistant 01

Alignment Assistant

Nine tools for reverse-indicator shaft alignment work — from the sag correction on your bracket to the final PASS/FAIL against API RP 686 tolerances.

  • Sag indicator, thermal growth, shim calculator — the math you'd otherwise do in a notebook.
  • Alignment moves converts reverse-indicator readings into inboard/outboard bolt-plane corrections.
  • 3D alignment plot renders iso/side/top views so a coupling shift is visible, not just tabular.
  • API RP 686 tolerance lookup by coupling type — with a PASS/FAIL check on your measured values.
Preview Alignment
Flange Parallelism Assistant — API 686-aligned field check page.
Assistant 02

Flange Parallelism Assistant

API 686-aligned parallelism check for piping-to-machine flanges. Read the feeler-gauge measurements, get the parallelism value, get the PASS/FAIL call.

  • Inch and mm support — no unit-conversion side quests.
  • Field-ready inputs match how the check is actually taken at four clock positions.
  • Tolerance lookup by flange size so the pass/fail is defensible in a signoff document.
Preview Flange Parallelism
Unit Conversion Assistant — length, mass, pressure, flow, and temperature conversions.
Assistant 03

Unit Conversion Assistant

Every physical quantity a rotating-equipment engineer needs, unit-converted in one place — length, mass, pressure, flow, temperature, torque, viscosity, and more.

  • Grouped by physical quantity, not by an alphabetical soup of unit names.
  • Engineering unit families — SI, US customary, oilfield practice — all one click away.
  • Copy-paste ready results in the format you'd write into a spec sheet or an email.
Preview Unit Conversion
Preservation Assistant — equipment preservation planning, monitoring, and compliance tracking.
Assistant 04

Preservation Assistant

Preservation planning and compliance tracking for stored rotating equipment — the paperwork trail you need before the machine goes back into service.

  • Preservation plan builder from equipment type, storage environment, and duration.
  • Compliance checklists aligned to common OEM and industry-standard preservation practices.
  • Inspection intervals and re-preservation reminders you can hand to a warehouse team.
Preview Preservation
LO Flushing and Lubrication Assistant — Reynolds-number-based flushing calculator.
Assistant 05

LO Flushing & Lubrication Assistant

Plan a lube-oil flush that actually cleans — Reynolds-number-based flow targets, temperature strategy, cleanliness targets, and duration estimates.

  • Turbulent-flow target from pipe geometry, oil viscosity, and temperature.
  • Cleanliness target aligned to ISO 4406 and API 614 practice for turbomachinery skids.
  • Flush-plan output in the format field crews and the client can both read.
Preview LO Flushing
Who it's for

Built for the people who commission and keep rotating equipment running.

Commissioning & field service engineers

Working on a turbomachinery skid at the client site — you need alignment numbers, flange checks, and unit conversions with API-aligned tolerances on hand, not on a laptop that's back at the hotel.

  • Runs on a tablet in the field
  • Imperial and metric side-by-side
  • Outputs you can put in the daily report verbatim

Millwrights, technicians & project managers

You need the same numbers the SME on the phone is quoting — and a trail of the calculation for the QA package. The assistants show inputs, formulas, and results side-by-side.

  • No install, no license, no VPN
  • Works on any modern browser
  • One subscription unlocks all five assistants for you and your team
Ready?

Open a tool. Run the numbers. Ship the job.

The demo shows what each assistant does. Pick a plan when you're ready to put the numbers on your own job — one subscription unlocks all five assistants.

Start subscription See the assistants